Tecno Spark 5 Air KD6A DA File | Download MTK Secure Boot Auth File

       Tecno Spark 5 Air KD6A DA File | Download MTK Secure Boot Auth File... If you’re using the Tecno Spark 5 Air KD6A device and facing i...

 

    Tecno Spark 5 Air KD6A DA File | Download MTK Secure Boot Auth File...If you’re using the Tecno Spark 5 Air KD6A device and facing issues like authentication or buffer error, you will need to fix it via the SP Flash Tool or Miracle Box or CM2 box. But if you don’t fix it, you will encounter a secure boot error. In order to flash those devices, you will require a Secure Boot DA file. Here you can download and install Tecno Spark 5 Air KD6A MTK Secure Boot DA file.

If your MediaTek powered Android device got corrupted or bricked, you will require a Download Agent file (Also known as DA File) to access its onboard storage and fix it. Here in this guide, we will share with you the steps to install the Download Agent (DA) files for your Tecno Spark 5 Air KD6A.

Advantages of Download Agent Loader Files

• Bypass Factory Reset Protection (FRP Lock) on the Tecno Spark 5 Air
• System Image backup of the Tecno Spark 5 Air KD6A
• Read security codes of an MTK device
• Can flash new firmware on an Tecno Spark 5 Air
• Clone a Recovery Image or boot files

Disclaimer:

GetDroidTips won’t be responsible for any kind of damage or error that will occur on your device by following this guide or flashing any file. Proceed at your own risk.

Download Link:

• Tecno Spark 5 Air DA File
  (File contains: mtk_allinone_da.bin)
• Download SP Flash Tool

Pre-requirements:

• This DA file is supported for the Tecno Spark 5 Air device only.
• You’ve to download the DA file for your Tecno Spark 5 Air device from the link above.
• A PC/Laptop and a USB cable are required.

Steps to Install Tecno Spark 5 Air KD6A DA File

Method 01: Use NCK Box

• Download NCK Pro Box | NCK Pro Box Drivers – Install both on your PC
• Launch the NCK box on your PC > Click on FRP-PATTERN-PRIVACY-RESET.
• Click to select Custom Loader.
• Then head over to the DA file and select the downloaded DA file.
• Click on Flash Mode.
• Next, open NCK Loader > Click on Settings.
• Head over to the DA file and select the downloaded DA file.
• Go back to the Service tab > Click on Reset.0
• Y0ur Tecno Spark 5 Air will now reboot with reset FRP lock system

Method 02: Use SP Flash Tool

• Launch the SP Flash Tool on your PC.
• Click on the Download tab.
• Click on the Choose option and select the downloaded DA file.
• The DA file will load automatically and install it.

Method 03: Use Miracle Box

For a complete step by step guide on how to install the DA file using Miracle Box

That’s it, guys. We hope you’ve successfully installed the DA file on your Tecno Spark 5 Air KD6A device. For any queries, feel free to ask in the comments below.