Download Itel S11 Pro Stock Rom/firmware file from here and repair your device. This firmware is in the scatter.txt format and can be flashe...
Download Itel S11 Pro Stock Rom/firmware file from here and repair your device. This firmware is in the scatter.txt format and can be flashed with SP Flash Tool or other MTK Flash Tools.
Itel S11 Pro was announced in July 2018. It comes with a 5.45-inch Full-Screen display with a resolution of 720 x 1440 pixels, 18:9 ratio (~282 ppi density). Itel S11 Pro is powered by Android 8.1 (Oreo) and comes with 2 GB RAM. As far as the cameras are concerned,
Itel S11 Pro was announced in July 2018. It comes with a 5.45-inch Full-Screen display with a resolution of 720 x 1440 pixels, 18:9 ratio (~282 ppi density). Itel S11 Pro is powered by Android 8.1 (Oreo) and comes with 2 GB RAM. As far as the cameras are concerned,
Download Itel S11 Pro Stock Rom/firmware file from here and repair your device. This firmware is in the scatter.txt format and can be flashed with SP Flash Tool or other MTK Flash Tools.
itel S11 Pro was announced in July 2018. It comes with a 5.45-inch Full-Screen display with a resolution of 720 x 1440 pixels, 18:9 ratio (~282 ppi density). itel S11 Pro is powered by Android 8.1 (Oreo) and comes with 2 GB RAM. As far as the cameras are concerned, the Itel S11 Pro has 8 MP, autofocus, LED flash primary camera on the rear and 8 MP 85° Wide Angle front shooter for selfies. Based on display size, processor and other hardware Itel S11 Pro comes with Non-removable Li-Ion 2400 mAh battery for better performance.
DEVICE SPECS
- Model: S11 Pro
- 2G: Yes
- 3G: Yes
- 4G LTE: No
- Body Dimension: 148 x 70.5 x 8.3 mm
- Number of SIMs: 2 (Dual)
- Display Type: IPS
- Display Size: 5.45″
- Resolution: 480*854
- OS: Android 8.1 (Oreo)
- Chipset: Mediatek MT6580
- Processor (CPU): Quad-core, 1.3GHz
- RAM:2 GB
- Internal Memory: 16 GB
- SD Card slot: Yes, up to 32GB
- Primary / Back: 8.0 MP
- Secondary / Front: 8.0 MP
- Features: Autofocus, LED flash
- WLAN: Yes
- Bluetooth: Yes
- WiFi Tethering / Hotspot: Yes
- Sensors: Proximity, Fingerprint, Light, G-sensor
- GPS: Yes
- Maps: Yes, Google maps
- Battery Capacity: 2400 mAh
FLASHING REQUIREMENTS
- Start by downloading and installing drivers in your Computer,
- Download WinRAR and installed if it isn't installed yet. It is required for extracting firmware and all other archives,
- Download SP Flash Tool and extract to a work folder,
- Also, download the stock rom from the link below and extract to your work folder.
- Now launch SP flash tool and load firmware scatter text file,
- Make sure the device is off, select flashing mode("download, format all + download...)
- Start the flash option and connect your device to PC via USB.
- Wait for the flashing to complete.
