You can Download latest flash file and flash tools for Itel Power Pro P41 phone here. Original stock ROM or Firmware available for free The ...
You can Download latest flash file and flash tools for Itel Power Pro P41 phone here. Original stock ROM or Firmware available for free
The Itel PowerPro P41 is powered by a 1.3GHz quad-core processor and it comes with 1GB of RAM. The phone packs 8GB of internal storage that can be expanded up to 32GB via a microSD card. As far as the cameras are concerned, the Itel PowerPro P41 packs a 5-megapixel primary camera on the rear and a 2-megapixel front shooter for selfies.
The Itel PowerPro P41 is powered by a 5000mAh non-removable battery.
The Itel PowerPro P41 is a single sim smartphone. Connectivity options include Wi-Fi, GPS, Bluetooth, FM, and 4G (with support for Band 40 used by some LTE networks in India).
Download from below the stock firmware for your ITEL P41. Firmware is a packet file and can be flashed with the SPD UpgradeDownload tool.
FLASHING REQUIREMENTS
In order to flash any Spreadtrum Android device, you should have in your possession the following programs/tools,
- A computer with Android spd USB drivers installed. You can download them from here
- A USB cable
- SPD flash tools like ResearchUpgrade or Miracle box. Download from here
- The firmware of the spd device to be flashed
FLASHING GUIDE
- Extracted downloaded stock firmware file
- Extract and run spd flash tool
- From the dashboard of the flash tool, locate and load spd packet firmware file
- After the firmware has been loaded in the flash tool, click on the play icon to start the flashing process
- Now remove phone battery, reinsert and then press and hold the boot key(volume down or volume up depending on the device) and connect the phone to pc via USB.
- The flashing process should start. Just sit still and wait for it to complete
